Concrete contractor in Fillmore, CA - Driveways and slabs built on a solid base
Prestige Thousand Oaks Concrete Company is a concrete contractor based in Thousand Oaks, CA, and we build driveways, patios, steps, footings and slabs for homeowners, builders and property owners in Fillmore, starting with the ground underneath.
- Licensed and fully insured.
- Free on-site estimates.
- Replies within 1 business day.
Older homes and roomier lots across Fillmore
Fillmore is a smaller city than most we work in, with older houses close to downtown, newer neighborhoods farther out and plenty of lots with room for a detached garage, a shop or a long driveway. Many of the calls we get here are about concrete that's been down a long time, such as front walks and driveways that have lifted, sunk or broken up at the edges. It's a longer drive than our jobs in Moorpark or back home in Thousand Oaks, so we plan the day so the crew and the concrete truck arrive together.
Older lots near downtown often have narrow side yards and big trees, so we work out how to get forms and concrete to the back without tearing up your yard, and we look at where roots are pushing on the old slab before we decide where the new one goes.
Our services in Fillmore, CA
- Concrete driveway building
Older Fillmore driveways often crack or sink because the dirt underneath was never packed. We break it out, dig to firm ground and pack a new base before we pour.
- Concrete patio construction
Fillmore yards often have space for a larger patio, and more slab means more water to move. We slope it away from the house and cut joints to guide cracks.
- Concrete steps construction
Front steps on older houses here often pull away from the porch as the ground settles. We replace them on new footings, with every riser the same height.
- Concrete cutting
Many slabs around Fillmore are sound in one spot and broken in another. We cut out just the broken part with clean edges, when the rest is worth keeping.
- Concrete footings
Carports, block walls and patio covers here stand on footings, the buried concrete that carries their weight. We dig each one to the depth the plans call for.
- Foundation installation
Many lots here have room for a garage or addition, and each needs its own foundation. On foundation installation jobs, we check the forms and steel before concrete arrives.
What older Fillmore lots ask of new concrete
Most of the trouble we see on older Fillmore slabs starts underneath, in the subgrade, the soil the concrete rests on. When that dirt was only raked smooth instead of dug out and packed, it keeps settling for years, and the slab sinks and cracks right along with it. So we dig down to firm ground and compact a proper base before a form goes in. If a budget has to give somewhere, I'd much rather trim a decorative finish than the base, because a surface can be redone later, but nobody gets under a slab once it's poured.
Water and timing come next. We look at where water runs on your lot before we set forms, so the new slab falls away from the house, and we pour early in the day, since a top finished in midday heat tends to turn weak and dusty. Slab size, old concrete to remove and base work move the price, while permit review and curing, the wait while the concrete gains strength before you use it, move the schedule, and the estimate I write on site covers your own job.
Get a free on-site estimate for your Fillmore concrete
Send the form or call (805) 413-5506, and we'll reply within one business day to set a time to come out to your Fillmore property. I look at the job and write the estimate myself, and it's free, done on site and comes with no pressure to book. Thank you for considering us.
Driveways, patios and steps
Fillmore concrete questions answered
How do I get a building permit for concrete work in Fillmore, CA?
Start with the City of Fillmore's Building & Safety staff, because they issue building permits and they're the first people to talk to before any construction work starts. The city issues permits only to owner-builders and licensed contractors. On our jobs, we check with the city before we schedule, and when a permit is needed we take care of the application and arrange the inspections, and we'll tell you early if the office asks for a soils report or engineered plans.
Does a fence or small shed need a permit in Fillmore?
Under the city's code, a fence no more than 6 feet high needs no permit, and neither does a one-story detached shed, playhouse or gazebo no taller than 12 feet and no larger than 120 square feet, with no plumbing, electrical or mechanical work. Those exemptions don't allow work that breaks the code or other local rules. The list doesn't cover driveways, patios or slabs, so we ask Building & Safety about concrete work before we schedule it.
When does a contractor need a CSLB license in California?
A contractor needs a license from the California Contractors State License Board whenever the project needs a building permit, uses employee labor, or adds up to $1,000 or more in labor and materials across one or more contracts. The board says a job may be exempt only when it needs no permit, uses no employee labor and costs less than $1,000 in all, and a larger project can't be split into smaller pieces to get under that line. The City of Fillmore also requires a City Business License from anyone doing business in the city, and contractors based outside it pay the basic rate plus the out-of-city tier, which the city's fee table lists at $114 in all. We're licensed and fully insured, and I'm glad to answer questions about it at the estimate.
How much can a contractor ask for as a down payment in California?
A contractor can't ask for or accept a down payment of more than $1,000 or 10 percent of the total contract price, whichever is less, according to the state licensing board. Every other payment has to be listed in the contract and tied to work completed or materials delivered. The board says this applies to all home improvement projects, so it covers a new driveway or patio the same way.
How much does a new concrete driveway cost in Fillmore?
The cost of a new driveway in Fillmore comes down to its size, how much old concrete has to be broken out and hauled away, and how much digging and base work the ground under it needs. The finish counts too, since a broom finish, the lightly brushed texture that gives tires and shoes some grip, costs less than stamped or decorative work, and tight access that keeps the truck from reaching the forms adds labor. I'll measure everything at the estimate and walk you through what goes into the price, so you know what you're paying for.
How do I keep a new concrete slab from cracking like my old one?
The best protection is a packed base, control joints cut on time and a slab that's allowed to cure, because those decide whether a slab settles and where it cracks. Control joints are shallow grooves we cut so the concrete has a straight line to crack along, and joints cut late or skipped are where stray cracks show up. Where the job calls for it, we add rebar, the steel set inside the slab that helps hold a crack tight, and we'll tell you when the slab is ready to walk on and when it's ready to drive on.